Press release
Rise in Construction and Automotive Sector Driving Metal Coatings Market Growth || Key Players: AKZO NOBEL N.V., BASF SE, AXALTA COATING SYSTEMS LTD., NSAI PAINT CO., LTD., HEMPEL A/S
The metal coatings market is projected to witness robust growth in the coming years, the demand is likely to surpass 6,000’000 tons by the end of 2018, according to the latest report by Fact.MR. The growth of the metal coatings market is largely influenced by the immense growth in the construction and automotive industry coupled with rising urbanization.
Get Free Sample Report Here:
https://www.factmr.com/connectus/sample?flag=S&rep_id=2381
Metal coatings market is highly fragmented with a maximum number of tier 2 companies. Product improvement, new product launches, and end-user penetration are high among tier 1 and tier 2 players. With a rise in regulations on VOC emission, both tier 1 and tier 2 players are focusing on new product launches and technologies.
Direct-to-Metal Coatings Witnesses Significant Demand across Industries
The demand for direct-to-metal coatings is on a rise owing to its cost efficiency and environmental benefits. Direct-to-Metal coatings are witnessing demand in light and medium duty industrial application with need or protection from elements such as UV degradation or corrosion.
Regulations pushing towards lower Volatile Organic Compounds (VOC) is one of the factors driving demand for direct-to-metal coatings. In direct-to-metal coatings, the waterborne direct-to-metal coatings are replacing solvent-borne coatings across various industries as it requires single-coat application as compared to two step primer, thereby saving cost and labor.
Browse Full Report with ToC Here:
https://www.factmr.com/report/2381/metal-coatings-market
The study primarily focuses on the factors influencing the growth of the metal coatings market, enabling readers to plan various business strategies on the basis of the key insights offered in the report on the metal coatings market. The key section of the report, offers an overview of the metal coatings market including a brief introduction to the metal coatings market, along with the segment-wise and region-wise analysis.
The report on the metal coatings market includes key segments that have been identified and presented using a taxonomy table. The metal coatings market is segmented into type, process, form, and end-use. These key segments are further divided into sub-segments.
Based on the type, the metal coatings market is segmented into Fluoropolymers, Polyurethanes, Polyester, Plastisol, Siliconized Polyester, and Others (epoxy, acrylic). By form type, the market is segmented into liquid and powder.
On the basis of process, the metal coatings market is segmented into Coil, Extrusion, and Hot Dip Galvanizing. Based on the end-use, the market is segmented into Automotive, Architectural, Protective and Marine, Consumer Goods & Appliances, and Others (Wind power, solar power, and packaging).
Liquid fluoropolymer coatings have been used for a long time in the construction of buildings in North America. However, with the growing trend of green building construction, especially in North America, the use and demand for metal coatings in powder form has increased as compared to the liquid metal coatings made using solvents and emitting VOCs. Meanwhile, new generation of power metal coatings are also under development providing capability of liquid coatings.
About Fact.MR
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.
Contact Us
Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
sales@factmr.com
www.factmr.com
Read Full PR Here:
https://www.factmr.com/media-release/789/metal-coatings-market
Get Free Sample Report Here:
https://www.factmr.com/connectus/sample?flag=S&rep_id=2381
Metal coatings market is highly fragmented with a maximum number of tier 2 companies. Product improvement, new product launches, and end-user penetration are high among tier 1 and tier 2 players. With a rise in regulations on VOC emission, both tier 1 and tier 2 players are focusing on new product launches and technologies.
Direct-to-Metal Coatings Witnesses Significant Demand across Industries
The demand for direct-to-metal coatings is on a rise owing to its cost efficiency and environmental benefits. Direct-to-Metal coatings are witnessing demand in light and medium duty industrial application with need or protection from elements such as UV degradation or corrosion.
Regulations pushing towards lower Volatile Organic Compounds (VOC) is one of the factors driving demand for direct-to-metal coatings. In direct-to-metal coatings, the waterborne direct-to-metal coatings are replacing solvent-borne coatings across various industries as it requires single-coat application as compared to two step primer, thereby saving cost and labor.
Browse Full Report with ToC Here:
https://www.factmr.com/report/2381/metal-coatings-market
The study primarily focuses on the factors influencing the growth of the metal coatings market, enabling readers to plan various business strategies on the basis of the key insights offered in the report on the metal coatings market. The key section of the report, offers an overview of the metal coatings market including a brief introduction to the metal coatings market, along with the segment-wise and region-wise analysis.
The report on the metal coatings market includes key segments that have been identified and presented using a taxonomy table. The metal coatings market is segmented into type, process, form, and end-use. These key segments are further divided into sub-segments.
Based on the type, the metal coatings market is segmented into Fluoropolymers, Polyurethanes, Polyester, Plastisol, Siliconized Polyester, and Others (epoxy, acrylic). By form type, the market is segmented into liquid and powder.
On the basis of process, the metal coatings market is segmented into Coil, Extrusion, and Hot Dip Galvanizing. Based on the end-use, the market is segmented into Automotive, Architectural, Protective and Marine, Consumer Goods & Appliances, and Others (Wind power, solar power, and packaging).
Liquid fluoropolymer coatings have been used for a long time in the construction of buildings in North America. However, with the growing trend of green building construction, especially in North America, the use and demand for metal coatings in powder form has increased as compared to the liquid metal coatings made using solvents and emitting VOCs. Meanwhile, new generation of power metal coatings are also under development providing capability of liquid coatings.
About Fact.MR
Fact.MR is a fast-growing market research firm that offers the most comprehensive suite of syndicated and customized market research reports. We believe transformative intelligence can educate and inspire businesses to make smarter decisions. We know the limitations of the one-size-fits-all approach; that's why we publish multi-industry global, regional, and country-specific research reports.
Contact Us
Fact.MR
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
sales@factmr.com
www.factmr.com
Read Full PR Here:
https://www.factmr.com/media-release/789/metal-coatings-market
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage
to this press release on woodPRI. woodPRI disclaims liability for any content contained in
this release.
Recommend
/newsMicroencapsulation Market Deep Analysis on Key Players - Dow Corning, Encapsys, Syngenta Crop Protection, Evonik Industries, 3M and Bayer
Market Study Report Adds Global Microencapsulation Market Size, Status and Forecast 2024 added to its database. The report provides key statistics on the current state of the industry and other analytical data to understand the market.
Extensive research is required for choosing the appropriate cor...
/newsGermany Airbag Market Size 2023: Global Share, Industry And Report Analysis By 2030 | Hyundai Mobis Co., Ltd. Key Safety Systems, Inc. Robert Bosch GmbH
Germany airbag market is expected to grow at a CAGR of around 6% during the forecast period. Germany Airbag Market research report refers to gathering and analyzing significant market data serve as best medium for various industry players to launch novel product or service. It is vital for key firms...
/newsSecurities Brokerages And Stock Exchanges Market Outlook 2021: Big Things are Happening
A new intelligence report released by HTF MI with title "Global Securities Brokerages And Stock Exchanges Market Survey & Outlook" is designed covering micro level of analysis by Insurers and key business segments, offerings and sales channels. The Global Securities Brokerages And Stock Exchange...
/newsRenewable Chemicals Market Emerging Trends and Competitive Landscape Forecast to 2028
The renewable chemicals market was valued at US$ 80,566.30 million in 2021 and is projected to reach US$ 1,76,750.76 million by 2028 it is expected to grow at a CAGR of 11.9% from 2021 to 2028. The research report focuses on the current market trends, opportunities, future potential of the market, a...
/newsHow Coronavirus is Impacting Cold Brew Coffee, Global Market Volume Analysis, Size, Share and Key Trends 2020-2026
"Market Latest Research Report 2020:
Los Angles United States, February 2020: The Cold Brew Coffee market has been garnering remarkable momentum in the recent years. The steadily escalating demand due to improving purchasing power is projected to bode well for the global market. QY Research's lates...
/newsCorporate E-Learning Market - Global Industry Size, Share, Key Players Analysis that are Infor, SkillSoft Corporation, Adrenna, CERTPOINT Systems and others with Regional Forecast to 2022
Overview:
E-Learning is used to enhance the learning procedures for newer job requirements and to make employees sound about the internal and external changes in the market and respective organizations. This method has created considerable differences in the ways of training and developing employee...
